Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring Active/Standby Switchover
This section describes how to restore the active/standby switchover function.
Procedure
- Log in to the active eSight server as the ossuser user. For the preset password, see the eSight User List released with the version (Support: https://support.huawei.com/carrier/docview!docview?nid=DOC1100890341; Support-E: https://support.huawei.com/enterprise/en/doc/EDOC1100227876).
- Run the following commands to restore active/standby switchover:
cd /opt/ommha/ha/bin
./forbidden_switch.sh cancel
- Verify the active/standby switchover function. If the following information is displayed, the active/standby switchover function is restored successfully:
Congratulations, exec successfully.