Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Weak Algorithm Suite Configuration Switch
This section describes how to enable the weak algorithm switch. Perform the operations in this section only when terminal management and UC management are required.
Procedure
- Use the PuTTY to log in to the active eSight server as the ossuser user.
- Run the following commands to enable the weak algorithm suite configuration switch:
Enabling the weak algorithm suite configuration function incurs security risks. Exercise caution when performing this operation.
cd eSight root installation directory/eSight/AppBase/app/com.huawei.oms.app.terminal/install/upgrade/script/linux
sh configweakalgorithm.sh
- Use the PuTTY to log in to the standby eSight server as the ossuser user.
- Go to step 2.
- Restart eSight for the configuration to take effect. For details, see Stopping eSight and Starting eSight.
