Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Error 1007 Is Reported During SUSE Linux Installation After RAID Has Been Automatically Configured
Symptom
Error 1007 is reported, as shown in Figure 9-11, during SUSE Linux installation after RAID has been automatically configured.
Possible Causes
During tool-based RAID configuration, RAID initialization is slow when a hard disk has a fault or large capacity. When the RAID tool displays the message "All configuration completed successfully", the initialization is not complete, and the system is still initializing the hard disk. As a result, a partition exception occurs during operating system installation.
Procedure
- Click Continue. The SUSE Linux operating system will automatically complete hard disk initialization.