Verifying the System Installation

Procedure

1. Use PuTTY to log in to the active eSight server as the ossuser user using the system IP address.

   For the preset password, see the eSight User List released with the version (Support: https://support.huawei.com/carrier/docview!docview?nid=DOC1100890341; Support-E: https://support.huawei.com/enterprise/en/doc/EDOC1100227876).

2. Check the running status of the system.

   cd /opt/ommha/ha/bin

   ./status.sh

   The following information is displayed:

   HAMode
   double
   
   NodeName HostName       HAVersion       StartTime           HAActive      HAAllResOK  HARunPhase
   ha1      esight199      V100R001C01     2019-06-17 21:09:56 active        normal      Actived
   ha2      esight187      V100R001C01     2019-06-17 21:18:35 standby       normal      Deactived
   
   NodeName ResName        ResStatus       ResHAStatus         ResType   
   ha1      Database       Active_normal   Normal              Active_standby 
   ha1      NMSServer      Normal          Normal              Single_active
   ha2      Database       Standby_normal  Normal              Active_standby
   ha2      NMSServer      Stopped         Unknown             Single_active

   If the value of ResStatus meets the requirement in Table 4-1, the system status is correct. Otherwise, contact Huawei system engineers.

   Table 4-1 Normal resource status of the eSight HA system

   Resource Item	Description	Node	Normal ResStatus Value	Normal ResHAStatus Value
   Database	Database resource status ID	the active server	Active_normal	Normal
   		the standby server	Standby_normal	Normal
   NMSServer	eSight service resource status	the active server	Normal	Normal
   		the standby server	Stopped	Unknown or Normal

3. Log in to eSight from the client browser and check whether the eSight version and functions are normal.
   1. In the address box, enter https://eSight server IP address:31943 and press Enter.
      • For details about how to set the client browser, see "Setting the Client Web Browser" in the eSight Operation Guide.
      • If a message indicating an issue with the website security certificate is displayed, see What Do I Do If eSight Displays a Security Certificate Error During Login.
      • If the browser is not equipped with a flash player, download and install Adobe Flash Player provided by eSight. Otherwise, some pages of eSight cannot be displayed normally.
      • If you set the eSight server IP address to localhost or 127.0.0.1, the security certificate cannot be installed.
      • The login IP address can be in IPv6 format, for example, https://[fc10::10:10:10:20]:31943/.
   2. If certificate authentication is configured, the home page of eSight is automatically displayed. Otherwise, enter the user name admin. For the preset password, see the eSight User List released with the version (Support: https://support.huawei.com/carrier/docview!docview?nid=DOC1100890341; Support-E: https://support.huawei.com/enterprise/en/doc/EDOC1100227876). Click Login.

      Change the password as promoted upon the first login.

   3. After login, click at the upper right corner, and verify that the current version is the target version. Otherwise, eSight should be reinstalled.

4. Log in to the maintenance tool using a browser on the client.
   1. In the address box, enter https://eSight server IP address:31945 and press Enter.
   2. On the maintenance tool login page, enter the user name sys. For the preset password, see the eSight User List released with the version (Support: https://support.huawei.com/carrier/docview!docview?nid=DOC1100890341; Support-E: https://support.huawei.com/enterprise/en/doc/EDOC1100227876). Click Login.

      Change the password as promoted upon the first login.

   3. Choose System > System Monitoring, and check whether the connection status is normal in the server information area. If no, contact Huawei technical support.