Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VLANs
The TM210 allows tagged and untagged packets to pass through. You can configure a VLAN ID on the OS or keep the packets untagged.
On Linux, you can temporarily or permanently make VLAN configuration take effect.
- If restarting the network service affects other services, see Temporarily Making the Configuration Take Effect.
- If restarting the network service does not affect other services, see Permanently Making the Configuration Take Effect.
The following describes how to configure VLANs on CentOS 7.6. Operations on other Linux OSs are similar.