Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing Filler Panels
Cover the vacant slots in the cabinet with filler panels to ensure good ventilation and a neat appearance.
Prerequisites
- Before installing a filler panel, ensure that the floating nuts are properly installed on the mounting bar.
- The following installation tools have been prepared:
- M6 screws
- M3 to M6 Phillips screwdriver
Procedure
- Install the filler panel on the cabinet with M6 screws, as shown in Figure 4-79.
- Check that all filler panels are installed.
