Using SmartKit for Deployment Inspection

Prerequisites

• SmartKit of a correct version has been installed on the maintenance terminal.

  You can check the version information in the version mapping table. To obtain the version mapping table, log in to https://support.huawei.com/enterprise/, enter your storage model in the search box, and select the associated path to the product documentation page. Then find and download the version mapping table.

• You have obtained the IP address of the management network port and the login user name and password.

Procedure

1. Log in to SmartKit. On the Storage tab, select Site Deployment Quality Inspection in Site Deployment Delivery.

2. Click Device Selection.

   The Select Devices dialog box is displayed.

3. Click Add Device, and add a device as instructed.
   1. Specify basic information of the storage device, such as management IP address.
   2. Enter the login username, password, and port.
   3. Click Finish. After successful verification, the storage device is added to the device list.
   4. Select the storage device on the device list, click Browse to specify Result Folder, and click OK(L).

   The Site Deployment Quality Inspection page is displayed.

4. Click Deployment Inspection.

   The Inspection Wizard Step 3-1: Check Site Deployment Quality Standards page is displayed.

5. Select the storage device, and click Fill Result.
   1. Check the electrical environment and network configuration based on the displayed checklist.
   2. Enter the check results in the Result column.
   3. Click Save to exit.
   4. Click Next.

   The Inspection Wizard Step 3-2: Select Check Items page is displayed.

6. Select the storage device, and click desired check items.
   1. Select the device to be inspected in the left pane.
   2. Select the check items in the right pane.

      You can click to expand the check items under a category.

   3. Click Next.

   The Inspection Wizard Step 3-3: Start Inspections page is displayed.

7. Check the task status and inspection result.
   • After the inspection is complete, the inspection results are automatically saved and an inspection report is generated. You can:
     • Click Open the result directory to view the inspection result data.
     • Click View the report to view the inspection report.
   • If any check item has failed, rectify the fault according to the handling suggestions.