Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing a Host LUN ID
A host LUN ID is an ID allocated by the storage system to a LUN mapped to a host. This ID is visible on the host. You can manually change host LUN IDs based on site requirements.
Prerequisites
- A mapping view has been created.
- The LUN group in the existing mapping view contains LUNs.
- Host services running on the LUN have been stopped. In addition, the LUN's physical disks and virtual disks generated by multipathing software have been uninstalled.
Context
- A host LUN ID is uniquely allocated to each LUN of a host.
- LUNs of different hosts can have the same host LUN ID.
Procedure
- Log in to DeviceManager.
- Choose
Provisioning >
Mapping View.
- Select a mapping view and click the LUN Group tab in the lower part of the left function pane.
- In the LUN group list, select the LUN whose host LUN ID you want to change and click Change Host LUN ID.
The Change Host LUN ID dialog box is displayed.
- Select a new host LUN ID and click OK.
- Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
- Click OK.
A message is displayed, indicating that the operation succeeded.
- Click OK.
Follow-up Procedure
After modifying the host LUN ID, scan disks on the host again.