Managing Basic Storage Services Using the CLI

OceanStor V500R007 Kunpeng Basic Storage Service Configuration Guide for Block

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

This section provides some CLI commands for managing basic block storage services.

The CLI commands supported by different models may vary.
For more CLI commands and their description, see the Command Reference specific to your product model and version.

Managing Disk Domains

Table B-1 Commands for managing disk domains

Operation	Command
Creating a disk domain	create disk_domain
Querying disk domains	show disk_domain general
Modifying a disk domain	change disk_domain general
Deleting a disk domain	delete disk_domain

Managing Storage Pools

Table B-2 Commands for managing storage pools

Operation	Command
Creating a storage pool	create storage_pool
Querying storage pools	show storage_pool general
Modifying a storage pool	change storage_pool general
Deleting a storage pool	delete storage_pool

Managing LUNs

Table B-3 Commands for managing LUNs

Operation	Command
Creating a LUN	create lun
Querying LUNs	show lun general
Modifying a LUN	change lun
Deleting a LUN	delete lun
Querying information about the LUN group related to a specified LUN	show lun lun_group
Querying information about the mapping related to a specified LUN	show lun mapping_view

Managing LUN Groups

Table B-4 Commands for managing LUN groups

Operation	Command
Creating a LUN group	create lun_group
Querying LUN groups	show lun_group general
Modifying a LUN group	change lun_group
Deleting a LUN group	delete lun_group
Adding LUNs to a LUN group	add lun_group lun
Removing LUNs from a LUN group	remove lun_group lun
Querying LUNs in a LUN group	show lun_group lun
Querying information about the mapping related to a specified LUN group	show lun_group mapping_view

Managing Hosts

Table B-5 Commands for managing hosts

Operation	Command
Creating a host	create host
Querying hosts	show host general
Modifying a host	change host
Deleting a host	delete host
Adding an initiator for a host	add host initiator
Removing an initiator	remove host initiator
Scanning for hosts where UltraPath is installed	scan host
Enabling or disabling the automatic host discovery function	change host_auto_scan
Checking whether the automatic host discovery function is enabled	show host_auto_scan
Querying the host group to which a host is added	show host host_group
Querying all LUNs mapped to a host	show host lun

Managing Initiators

Table B-6 Commands for managing initiators

Operation	Command
Creating an initiator	create initiator iscsi create initiator fc
Querying initiators	show initiator
Modifying an initiator	change initiator
Deleting an initiator	delete initiator iscsi delete initiator fc

Managing Host Groups

Table B-7 Commands for managing host groups

Operation	Command
Creating a host group	create host_group
Querying host groups	show host_group general
Modifying a host group	change host_group general
Deleting a host group	delete host_group
Adding hosts to a host group	add host_group host
Removing hosts from a host group	remove host_group host
Querying hosts in a host group	show host_group host
Querying information about the mapping related to a specified host group	show host_group mapping_view

Managing Port Groups

Table B-8 Commands for managing port groups

Operation	Command
Creating a port group	create port_group
Querying port groups	show port_group general
Modify a port group	change port_group general
Deleting a port group	delete port_group
Adding ports to a port group	add port_group port
Removing ports from a port group	remove port_group port
Querying ports in a port group	show port_group port
Querying information about the mapping related to a specified port group	show port_group mapping_view

Managing Mappings

Table B-9 Commands for managing mappings

Operation	Command
Creating a mapping	create mapping_view
Querying mappings	show mapping_view general
Modifying a mapping	change mapping_view
Deleting a mapping	delete mapping_view
Adding a host group to a mapping	add mapping_view host_group
Removing a host group from a mapping	remove mapping_view host_group
Adding a LUN group to a mapping	add mapping_view lun_group
Removing a LUN group from a mapping	remove mapping_view lun_group
Adding a port group to a mapping	add mapping_view port_group
Removing a port group from a mapping	remove mapping_view port_group
Querying host groups in a mapping	show mapping_view host_group
Querying LUN groups in a mapping	show mapping_view lun_group
Querying port groups in a mapping	show mapping_view port_group

Managing the Service Network

Table B-10 Commands for managing Ethernet ports

Operation	Command
Querying Ethernet ports	show port general physical_type=ETH logic_type=Host_Port
Modifying an Ethernet port	change port eth
Querying bit errors	show port bit_error NOTE: You can also run this command to query bit errors on other types of ports.

Table B-11 Commands for managing bond ports

Operation	Command
Creating a bond port	create bond_port
Querying bond ports	show bond_port
Modifying a bond port	change bond_port general
Deleting a bond port	delete bond_port

Table B-12 Commands for managing VLANs

Operation	Command
Creating a VLAN	create vlan general
Querying VLANs	show vlan general
Modifying a VLAN	change vlan general
Deleting a VLAN	delete vlan general

Table B-13 Commands for managing logical ports

Operation	Command
Creating a logical port	Creating a logical port based on a bond port: create logical_port bond Creating a VLAN-based logical port: create logical_port vlan Creating a logical port based on an Ethernet port: create logical_port eth
Querying logical ports	show logical_port general
Modifying a logical port	change logical_port general
Deleting a logical port	delete logical_port general
Adding a route for a logical port	IPv4 network: add logical_port ipv4_route IPv6 network: add logical_port ipv6_route
Querying routes of a logical port	show logical_port route
Deleting routes of a logical port	IPv4 network: remove logical_port ipv4_route IPv6 network: remove logical_port ipv6_route

Table B-14 Commands for managing the Fibre Channel network

Operation	Command
Querying Fibre Channel ports	show port general physical_type=FC
Modifying a Fibre Channel port	change port fc

Download

Updated: 2022-04-01

Document ID: EDOC1100123477

Downloads: 293

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate