Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding an Object
This operation enables you to add a LUN or snapshot to a LUN group to expand storage space.
Procedure
- Log in to DeviceManager.
- Choose
Provisioning >
LUN > LUN Group.
- Select the LUN group you want to modify and click Add Object.
The Add Object dialog box is displayed.
- Select the LUN or snapshot you want to add to the LUN group.
By default, Shows only the LUNs that do not belong to any LUN group at the lower left corner of the dialog box is selected to facilitate LUN locating.
- Click
to add the selected LUN or snapshot to Selected LUNs or Selected Snapshots.
- Click OK.
The Execution Result dialog box is displayed, indicating that the operation succeeded.
- Click Close.
Provisioning > 
LUN > LUN Group.
to add the selected LUN or snapshot to Selected LUNs or Selected Snapshots.
