Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Restore the IBC Public/Private Key Pair to the Default Value?
Question
If the default IBC public/private key pair is not used in controller expansion, pre-expansion check will fail. How can I restore the IBC public/private key pair to the default value?
Answer
- Log in to the storage system using the serial port.
- Use the _super_admin account to log in to the storage system. You can obtain the password of the account from the Security Configuration Guide.
- Run the initibckey command to restore the public/private key pair of ibc_os_hs to the default value.
Storage: _super_admin> initibckey The initialization of ibc_os_hs key file is successful.
The IBC public/private key pair must be restored on each controller.