Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing SO 100 Gbit/s RDMA Interface Modules
SO 100 Gbit/s RDMA interface modules are required for adding controllers.
Prerequisites
ESD wrist straps are required.
Precautions
- SO 100 Gbit/s RDMA interface modules must be installed in slots IOM H3/L3 and IOM H10/L10, as shown in Figure 11-83.
Procedure
- Wear an ESD wrist strap.
- Remove the panel covering the slot where an SO 100 Gbit/s RDMA module is to be inserted.
- Insert the SO 100 Gbit/s RDMA interface module into the slot until it clicks into place.
