About This Document
Purpose
This document describes how to replace parts of OceanStor V5 series and provides instructions on safety operations, preparations, and precautions.
The following table lists the product models that this document is applicable to.
Product Series |
Product Model |
|---|---|
OceanStor 2000 V5 series |
OceanStor 2200 V5/2600 V5 |
OceanStor 5000 V5 series |
OceanStor 5300 V5/5500 V5/5600 V5/5800 V5 |
OceanStor 5000F V5 series |
OceanStor 5300F V5/5500F V5/5600F V5/5800F V5 |
OceanStor 6000 V5 series |
OceanStor 6800 V5 |
OceanStor 6000F V5 series |
OceanStor 6800F V5 |
OceanStor 18000 V5 series |
OceanStor 18500 V5/18800 V5 |
OceanStor 18000F V5 series |
OceanStor 18500F V5/18800F V5 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 13 (2023-01-16)
This is the thirteenth release.
Refresh some description.
Issue 12 (2022-04-30)
This issue is the twelfth official release.
Added section "Replacing a Power Module (for OceanStor 5300 V5)."
Optimized descriptions in section "Replacing a Power Module (for OceanStor 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, or 5800F V5)."
Optimized descriptions in section "Replacing a Power Module (for a Smart Disk Enclosure)."
Issue 11 (2021-10-30)
This issue is the eleventh official release.
Optimized description of some sections.
Issue 10 (2021-09-15)
This issue is the tenth official release.
Added the description of OceanStor 2200 V5.
Issue 09 (2021-06-30)
This issue is the ninth official release.
Added chapter "Parts Replacement/Removal Description".
Issue 08 (2021-01-30)
This issue is the fifth official release.
Optimized description of some sections.
Issue 07 (2020-11-30)
This issue is the seventh official release.
- Added the description of OceanStor 2600 V5.
- Added the description of controller enclosures of OceanStor 5300 V5 (NVMe) and OceanStor 5300F V5 (NVMe).
Issue 06 (2020-09-15)
This issue is the sixth official release.
Added chapter "Replacing a Data Switch".
Issue 05 (2020-07-15)
This issue is the fifth official release.
Added the operation guide for replacing high-density disk enclosure components.
Issue 04 (2020-04-10)
This issue is the fourth official release.
Optimized description of some sections.
Issue 03 (2019-12-30)
This issue is the third official release.
Added chapter "Before You Start".
Issue 02 (2019-10-30)
This issue is the second official release.
Added OceanStor 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5 to product models.
Issue 01 (2019-07-30)
This issue is the first official release.