Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Remote Replication Pair
This section describes how to create a remote replication pair.
Prerequisites
- A storage pool has been created on the secondary remote replication device.
- The remote LUN has not been mapped to a host.
Context
- On an A-B-C cascading 3DC network, create a remote replication pair on the storage system at site B.
The secondary LUN of the HyperMetro pair between sites A and B is the primary LUN of the remote replication pair between sites B and C.
- On an A-B, A-C parallel 3DC network, create a remote replication pair on the storage system at site A.
The local LUN of the HyperMetro pair at site A is the primary LUN in the remote replication pair.
Operation Description
- To create a remote replication pair, log in to DeviceManager and choose Services > Block Service > LUNs. Select the desired LUN, click Protect and choose Create Remote Replication.
- For details about how to create a remote replication pair, see the HyperReplication Feature Guide specific to your product model.
- When creating a remote replication pair, do not select Yes for Standby in the Advanced properties.
