Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing DR Star Trios Created Using LUNs or Pairs
This section describes how to modify and delete a DR Star trio created using LUNs or pairs.
- Viewing DR Star Trios
This section describes how to view created DR Star trios and members in them. - Modifying DR Star Trios
This section describes how to modify switchover policies and silent time of DR Star trios. - Enabling DR Star Trios
This section describes how to enable DR Star trios. - Disabling DR Star Trios
This section describes how to disable DR Star trios. - Enabling Write Protection for the Third Site
This section describes how to enable write protection for remote resources of asynchronous remote replication remote devices in the third site of a DR Star trio. - Disabling Write Protection for the Third Site
This section describes how to disable write protection for remote resources of asynchronous remote replication remote devices in the third site of a DR Star trio. - Manually Switching the Status of Asynchronous Remote Replication Pairs
This section describes how to switch the status of two asynchronous remote replication pairs in a DR Star trio. An asynchronous remote replication pair in the standby state will not synchronize data. - Deleting DR Star Trios
This section describes how to delete DR Star trios.