Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Function to Send ARP Packets at a Constant Speed
This section describes how to enable a device to send ARP packets at a constant rate, so that normal services of the peer device are not affected.
Background
By default, a device broadcasts ARP aging probe and Miss messages at varied rates. If the number of ARP packets received by the peer device exceeds its processing capability in milliseconds, packets may be lost and services may be affected. To resolve the problem, enable the device to send ARP packets at a constant rate and adjust the constant rate as required so that normal services of the peer device are not affected.
