Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Access to an Internal IPv6 Host Using an IPv4 Address
Configuring internal host access through a public IP address allows external users to access internal users using the specified public IP address and port number.
Usage Scenario
NAT64 can be configured to allow IPv6 users on a private network to access public network IPv4 services and prevent IPv4 users from accessing IPv6 users because the IPv4 users cannot obtain IPv6 user information. The NE20E supports the internal server function in a NAT instance, allowing external IPv4 users to communicate with IPv6 users by accessing the public IPv4 address of a specified private IPv6 server.
- Configuring an Internal Server in a NAT64 Instance
The internal server function can be configured on a private network so that IPv4 users can access an IPv6 server through a NAT64 device. - Verifying the Configurations of the Internal Server Function for NAT64
You can verify the configuration of the internal server function in a NAT64 instance.
