Configuration Examples for ND
This section provides ND configuration examples.
- Example for Configuring IPv6 Neighbor Discovery
This section provides an example for configuring IPv6 neighbor discovery. - Example for Configuring IPv6 SEND
This section provides examples for configuring IPv6 SEND. - Example for Configuring NS Multicast Suppression on an EVPN MPLS
This section describes how to configure NS multicast suppression on an EVPN MPLS to reduce or suppress excess NS messages. - Example for Configuring Routed Proxy ND
This section provides an example for configuring routed proxy ND in a scenario where two hosts are on the same network segment but different physical networks and the gateway connecting to the two hosts are configured with different IP addresses. - Example for Configuring Any Proxy ND
This section provides an example for configuring any proxy ND in a scenario where two hosts are on the same network segment but different physical networks and the gateways connecting to the two hosts have the same IP address. - Example for Configuring Intra-VLAN Proxy ND
This section provides an example for configuring intra-VLAN proxy ND in a scenario where two hosts are on the same network segment and VLAN but the VLAN is configured with user isolation. - Example for Configuring Inter-VLAN Proxy ND in a VLAN Aggregation Scenario
This section provides an example for configuring inter-VLAN proxy ND to allow devices in different VLANs to communicate with each other in a VLAN aggregation scenario. - Example for Configuring Local Proxy ND
This section provides an example for configuring local proxy ND in a scenario where hosts are on the same network segment and BD but the BD is configured with user isolation. - Example for Configuring Inter-VLAN Proxy ND on an L2VPN+L3VPN IP RAN
This section provides an example for configuring inter-VLAN proxy ND on an L2VPN+L3VPN IP RAN.