Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Algorithm of Load Balancing
For the default hash factors of hash algorithm in typical load balance scenarios, see the chapter Appendix: Default Hash Factors.
- Configuring Hash Factors (VLL or IP Forwarding Scenarios)
- Configuring Hash Factors (VPLS or Bridged Forwarding Scenarios)
- Configuring Hash Factors (P nodes in MPLS Scenarios)
- Configuring Hash Factors (Ingress PE in VLL Scenario)
- Configuring Hash Factors (L2/L3VPN Over L2VPN Scenarios)
- Configuring Hash-arithmetic
- Configuring Load Balancing Based on Inner Information of Tunnel Packets (L3VPN IPv4 Accessing SRv6 BE Tunnels)
- Configuring Dynamic Load Balancing
If existing load balancing configurations do not meet actual needs, configure dynamic load balancing. - Enable ECMP Load Balancing Consistency
