Application of BFD Association
Applications Associated with BFD
Association between BFD and other protocols improves protocol switching performance and reduces service traffic loss. BFD can be associated with protocols such as routing, MPLS, and VPN.
Function |
Link |
|---|---|
BFD for IPv4 static routes |
See Configuring Static BFD for IPv4 Static Routes in "Static Route Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for IPv6 static routes |
See Configuring Static BFD for IPv6 Static Routes in "Static Route Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for RIP |
See Configuring BFD for RIP in "RIP Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for OSPF |
See Configuring BFD for OSPF in "OSPF Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for OSPFv3 |
See Configuring BFD for OSPFv3 in "OSPFv3 Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for OSPF IP FRR |
See (Optional) Binding OSPF IP FRR and BFD in "OSPF Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for IS-IS |
See Configuring Static BFD for IS-IS and Configuring Dynamic BFD for IS-IS in "IPv4 IS-IS Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for IPv6 IS-IS |
See Configuring Dynamic BFD for IPv6 IS-IS in "IPv6 IS-IS Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
BFD for BGP |
See Configuring BFD for BGP in "BGP Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Unicast Routing. |
Function |
Link |
|---|---|
BFD for MPLS LDP |
See Configuring Static BFD to Detect an LDP LSP and Configuring Dynamic BFD for LDP LSPs in "MPLS LDP Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - MPLS. |
BFD for MPLS TE |
See Configuring Dynamic BFD for RSVP, Configuring Static BFD for CR-LSPs, Configuring Dynamic BFD for CR-LSPs, and Configuring Static BFD for TE Tunnels in "MPLS TE Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - MPLS. |
BFD for PWs |
See Configuring Static BFD for PWs and Configuring Dynamic BFD for PWs in "PWE3 Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - VPN. |
BFD for VSI PWs |
See (Optional) Configuring BFD for VSI PWs in "VPLS Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - VPN. |
Function |
Link |
|---|---|
Association between the BFD session status and the interface status |
See Configuring Association Between the BFD Session and the Interface Status. |
Association between the BFD session status and the interface status (the interface is triggered to go Down) |
|
Association between BFD modules |
|
Association between the BFD session status and the card status |
|
BFD for VRRP |
See Configuring Association Between VRRP and BFD to Implement a Rapid Active/Standby Switchover and Configuring Association Between VRRP and Peer BFD to Implement a Rapid Active/Standby Switchover. |
BFD for VRRP6 |
See Configuring Association Between VRRP6 and BFD to Implement a Rapid Active/Standby Switchover. |
BFD for EFM |
|
BFD for PIM |
See Configuring PIM BFD in "IPv4 PIM Configuration" in the S9300 and S9300X V200R019C10 Configuration Guide - IP Multicast. |