Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting CFM Parameters
Procedure
- Setting the RMEP activation time
Run system-view
The system view is displayed.
Run cfm md md-name
The MD view is displayed.
Run ma ma-name
The MA view is displayed.
Run active time time
The RMEP activation time is configured.
- Setting the anti-jitter time during alarm restoration
Run system-view
The system view is displayed.
Run cfm md md-name
The MD view is displayed.
Run ma ma-name
The MA view is displayed.
Run alarm finish time time
The anti-jitter time during alarm restoration is configured.
- Setting the anti-jitter time during alarm generation
Run system-view
The system view is displayed.
Run cfm md md-name
The MD view is displayed.
Run ma ma-name
The MA view is displayed.
Run alarm occur time time
The anti-jitter time during alarm generation is configured.