Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Link Switching Failure in a Smart Link Group
Procedure
- Check configuration of the Smart Link to see whether data flows are locked on an interface.
Run the display smart-link group group-id command and check the Link status field in the command output.
If the Link status field displays lock or force, data flows are locked to the master or slave interface. Run the undo smart-link { force | lock } command to remove the lock.