Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an mVRRP6 Group
Context
Each VRRP6 group needs to maintain its own state machine. Configuring an mVRRP6 group reduces bandwidth occupied by VRRP6 Advertisement packets.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- (Optional) On an Ethernet interface, run undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode.
- (Optional) Run vrrp6 vrid virtual-router-id virtual-ip virtual-ipv6-address [ link-local ]
A VRRP6 group is created, and a virtual IPv6 address is assigned to the VRRP6 group.
By default, no VRRP6 group is created.
- Run admin-vrrp6 vrid virtual-router-id
The VRRP6 group is configured as an mVRRP6 group.
By default, no mVRRP6 group is configured.