Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Downstream Device Cannot Ping the Virtual IP Address of a VRRP Group
Procedure
- Check whether the ping to the virtual IP address of the VRRP group is enabled.
By default, the master is enabled to respond to ping packets. If this function is disabled, a downstream device cannot ping the virtual IP address of a VRRP group.
Run the display current-configuration command in any view of the master to check whether the undo vrrp virtual-ip ping enable command is used. If the undo vrrp virtual-ip ping enable command is used, run the vrrp virtual-ip ping enable command in the system view to enable the ping to the virtual IP address of a VRRP group.