Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic Functions of an IPv4 VRRP Group
- (Optional) Setting the Maximum Number of VRRP Groups
- Creating a VRRP Group
- Setting the Device Priority in a VRRP Group
- (Optional) Configuring the VRRP Version Number
- (Optional) Configuring a VRRP Preemption Mode
- (Optional) Configuring VRRP Time Parameters
- (Optional) Setting the Mode in Which VRRP Advertisement Packets Are Sent in a Super-VLAN
- (Optional) Disabling VRRP TTL Check
- (Optional) Setting the Authentication Mode of VRRP Advertisement Packets
- (Optional) Enabling the Ping to a Virtual IP Address
- (Optional) Configuring VRRP Smooth Switching
- (Optional) Enabling the Backup Device in a VRRP Group to Forward Traffic
- (Optional) Enabling Passive ARP
- Verifying the Configuration of Basic Functions of an IPv4 VRRP Group