Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an mVRRP Group
Context
Each VRRP group needs to maintain its own state machine. Configuring an mVRRP group reduces bandwidth occupied by VRRP Advertisement packets.
Procedure
Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
(Optional) On an Ethernet interface, run undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode.
Run vrrp vrid virtual-router-id virtual-ip virtual-address
A VRRP group is created, and a virtual IP address is assigned to the VRRP group.
By default, no VRRP group is created.
Run admin-vrrp vrid virtual-router-id
The VRRP group is configured as an mVRRP group.
By default, no mVRRP group is configured.