No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
Log Reference
S9300 and S9300X V200R019C10

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPV6FIBAGENT

IPV6FIBAGENT

IPV6FIBAGENT/3/MEMCHECK

Message

IPV6FIBAGENT/3/MEMCHECK:Memory was checked after the routes were deleted due to policy change, and the return value was [return-value].

Description

Memory checking was performed after route deletion.

Parameters

Parameter Name Parameter Meaning
[return-value] indicates types of returned values, including

1: indicates that memory is insufficient.

2: indicates that memory is seriously insufficient.

Possible Causes

Memory checking was performed after route deletion.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

IPV6FIBAGENT/4/PLYDELE6

Message

IPV6FIBAGENT/4/PLYDELE6:The routes were deleted due to FIB6 policy change. (QueueLength=[ULONG], MaxLength=[ULONG], UnreadNumber=[ULONG])

Description

FIB6 entries were being deleted according to the changes of FIB6 policies.

Parameters

Parameter Name Parameter Meaning
QueueLength indicates the length of a queue.
MaxLength indicates the maximum length of a queue.
UnreadNumber indicates the number of unread messages in the IPC queue.

Possible Causes

When the FIB6 module on the interface board read the IPC message queue, the queue length was longer than the specified value and the length of the queue containing unread messages was also longer than the set value.

Procedure

  1. This log message indicates a normal situation, and no action is required.

IPV6FIBAGENT/4/SENDPLYSLOT6

Message

IPV6FIBAGENT/4/SENDPLYSLOT6:FIB6 failed to send a policy to slot [slot-number].

Description

FIB6 failed to send a policy-change message to the interface board.

Parameters

Parameter Name Parameter Meaning
[slot-number] indicates the slot number of an interface board.

Possible Causes

The main control board failed to send a policy-change message to the interface board during hot plugging.

Procedure

  1. Run the display fib-policy slot [ slot-number ] command to view of FIB policies on the interface board and save the output of this command.
  2. Collect log information and configuration information, and then contact technical support personnel.

IPV6FIBAGENT/4/SENDQUESLOTFAIL6

Message

IPV6FIBAGENT/4/SENDQUESLOTFAIL6:FIB6 failed to send a query to slot [slot-number].

Description

The FIB6 module failed to send a query to the interface board.

Parameters

Parameter Name Parameter Meaning
[slot-number] indicates the slot number of an interface board.

Possible Causes

After active/standby switchover, the main control board must query the status of the interface board.

Procedure

  1. Run the display fib overload state slot [ slot-number ] command to view overload status of the interface board and save the output of this command.
  2. Collect log information and configuration information, and then contact technical support personnel.

IPV6FIBAGENT/6/TRIGDELEROUT6

Message

IPV6FIBAGENT/6/TRIGDELEROUT6:The routes were deleted due to FIB6 policy change. The type of deletion was [process-type].

Description

Deleting FIB6 entries according to the changes of FIB policies was triggered.

Parameters

Parameter Name Parameter Meaning
[process-type] indicates types of operations, including

1: indicates that the FIB6 entries must be deleted if overload suspension happens.

2: indicates that FIB6 entries must be deleted if overload suspension happens.

Possible Causes

Deleting FIB6 entries according to the changes of FIB policies was triggered.

Procedure

  1. This log message indicates a normal situation, and no action is required.
Translation
简体中文
Download
Updated: 2022-01-25

Document ID: EDOC1100126838

Views: 38977

Downloads: 16

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next
Huawei e+ App Huawei e+

Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :