Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Interface Description
Context
To facilitate switch management and maintenance, you can configure interface descriptions. An interface description can contain:
- The switch where the interface is located
- The interface type
- The remote device
For example, a description of To-[DeviceB]GE-1/0/1 indicates that an interface of this switch is connected to GE1/0/1 of device B.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run description description
A description is configured for the interface.
By default, an interface has no description.
The interface description is displayed from the first non-space character.
