Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the MPLS Function
Procedure
- Run system-view
The system view is displayed.
- Run mpls lsr-id lsr-id
An LSR ID is specified.
- Run mpls
MPLS is enabled and the MPLS view is displayed.
- Run quit
Return to the system view.
- Run mpls ldp
LDP is enabled.
- Run quit
Return to the system view.
- Run interface interface-type interface-number
The IPv4 network-side interface view is displayed.
- Run mpls
MPLS is enabled on the interface.
- Run mpls ldp
MPLS LDP is enabled on the interface.