Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring IPv6 Running Status
Procedure
- Run the display ipv6 interface [ interface-type interface-number | brief ] command to check IPv6 information about a specified interface.
- Run the display ipv6 statistics command to check IPv6 traffic statistics.
- Run the display icmpv6 statistics command to check ICMPv6 traffic statistics.
- Run the display tcp ipv6 status command to check the TCP6 connection status.
- Run the display tcp ipv6 statistics command to check TCP6 traffic statistics.
- Run the display udp ipv6 statistics command to check UDP6 statistics.
- Run the display ipv6 neighbors [ ipv6-address | [ vid vid ] interface-type interface-number | vpn-instance vpn-instance-name ] command to check neighbor entries.
- Run the display ipv6 socket [ socktype socket-type | task-id task-id socket-id socket-id ] command to check information about a specified socket.
- Run the display ipv6 pathmtu [ vpn-instance vpn-instance-name ] { ipv6-address | all | dynamic | static } command to check PMTU entries.
- Run the display default-parameter tcp6 command to check the default values of all configurable parameters on the TCP6 module.
- Run the display ipv6 attack-source overlapping-fragment command to check source information about overlapping fragment attacks.
- Run the display rawip ipv6 statistics command to check Raw IPv6 packet statistics.
- Run the display tcp ipv6 authentication-statistics command to check authentication statistics of a specified TCP6 connection.