Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
- About This Document
IP Address Configuration- ARP Configuration
- Overview of ARP
- Understanding ARP
- Summary of ARP Configuration Tasks
- Licensing Requirements and Limitations for ARP
- Default Settings for ARP
- Configuring ARP
- Adjusting Aging Parameters of Dynamic ARP Entries
- Configuring Static ARP
- Configuring Proxy ARP
- Configuring Multi-Interface ARP
- Configuring Dynamic Learning of ARP Entries with Multicast MAC Addresses
- Configuring Egress ARP Inspection
- Disabling a Device from Packetizing ARP Packets and ARP Miss Messages
- Disabling a VLANIF Interface from Broadcasting ARP Packets
- Enabling the ARP Module to Send ARP Vlink Direct Routes to the RM Module
- Configuring ARP Unicast Probe
- Configuring ARP-Ping
- Configuring IP Address Conflict Detection
- Disabling ARP Learning for Packets with Double VLAN Tags
- Configuring the Function of Periodically Updating ARP Entries
- Configuring the ARP Learning Priority
- Maintaining ARP
- Configuration Examples for ARP
- Example for Configuring Static ARP
- Example for Configuring Routed Proxy ARP
- Example for Configuring Intra-VLAN Proxy ARP
- Example for Configuring Inter-VLAN Proxy ARP
- Example for Configuring Multi-Interface ARP (NLB Cluster Working in Multicast Mode)
- Example for Configuring Multi-Interface ARP (NLB Cluster Working in IGMP Multicast Mode)
- Example for Configuring Egress ARP Inspection
- FAQ About ARP
- DHCP Configuration
- Overview of DHCP
- Key Concepts of DHCP
- How DHCP Works
- Licensing Requirements and Limitations for DHCP
- Configuring DHCP
- Configuration Examples for DHCP
- Example for Configuring a DHCP Server (Based on an Interface Address Pool)
- Example for Configuring a DHCP Server to Allocate Different Network Parameters from a Global Address Pool to Dynamic and Static Clients
- Example for Configuring a DHCP Server to Allocate IP Addresses to IP Phones
- Example for Configuring a DHCP Server in a Super-VLAN
- Example for Configuring DHCP Servers on the Same Network Segment (Based on the Global Address Pool in VRRP Networking)
- Example for Configuring a DHCP Relay Agent (DHCP Relay Agent and DHCP Server on the Same Network)
- Example for Configuring a Device as a DHCP Relay Agent (Connected to a DHCP Server over a BGP/MPLS IP VPN Tunnel)
- Example for Configuring a DHCP Relay Agent (Connected to a DHCP Server over a GRE Tunnel)
- Example for Configuring a DHCP Client
- Example for Configuring a BOOTP Client
- Troubleshooting DHCP
- FAQ About DHCP
- How Can I Ensure that Users Accessed Through a Fit AP Select a Correct DHCP Server? How Can I View DHCP Packet Exchange Logs?
- When Both the DHCP Server and Relay Functions Are Enabled on an Interface, Which Function Is Processed Preferentially?
- When switch Functions as a DHCP Server, Can the DHCP Server Select an Address Pool Based on the Secondary IP Address?
- DNS Configuration
- mDNS Gateway Configuration
- mDNS Relay Configuration
- UDP Helper Configuration
- IP Performance Optimization Configuration
- Overview of IP Performance Optimization
- Licensing Requirements and Limitations for IP Performance Optimization
- Default Settings for IP Performance Optimization
- Optimizing IP Performance
- Configuring Source IP Addresses Verification
- Discarding IP Packets with Invalid Destination IP Addresses and Recording Logs
- Configuring the Switch to Fragment Outgoing IP Packets
- Configuring a Load Balancing Mode for IP Packet Forwarding
- Configuring the Switch to Discard IP Packets with Options
- Configuring the Switch to Discard IP Packets Matching No Routing Entry
- Configuring the Switch to Discard IPv6 Packets with Specified Extension Headers
- Configuring an Interface to Forward Directed Broadcast Packets
- Enabling the Switch to Perform Layer 2 Forwarding for IP Traffic During a Ring Network Switchover
- Configuring ICMP Properties
- Configuring TCP Properties
- Verifying the IP Performance Optimization Configuration
- Maintaining IP Performance
- Example for Optimizing System Performance by Discarding Certain ICMP Packets
- Basic IPv6 Configuration
- Overview of IPv6
- Understanding IPv6
- Licensing Requirements and Limitations for IPv6
- Default Settings for IPv6
- Configuring IPv6 Addresses for Interfaces
- Configuring ICMPv6 Error Packet Control
- Configuring IPv6 Neighbor Discovery
- Configuring ND Proxies
- Disabling a Device from Packetizing ND Packets and ND Miss Messages
- Configuring the Optimized ND Reply Function
- Configuring the Trap Function for Hash Conflicts of ND Entries
- Configuring the Device Not to Send NS Packets Destined for Other Devices to the CPU
- Configuring a DNS Suffix for RA Packets
- Configuring a DNS Server Address for RA Packets
- Configuring PMTU
- Configuring TCP6
- Maintaining IPv6
- Example for Configuring IPv6 Addresses for Interfaces
- DHCPv6 Configuration
- Overview of DHCPv6
- Understanding DHCPv6
- Application Scenarios for DHCPv6
- Licensing Requirements and Limitations for DHCPv6
- Default Settings for DHCPv6
- Configuring a DHCPv6 Server
- Configuring the DHCPv6 DUID
- Configuring an IPv6 Address Pool
- (Optional) Configuring Network Server Addresses for the IPv6 Address Pool
- (Optional) Configuring the Options of an IPv6 Address Pool
- (Optional) Configuring the DHCPv6 Data Saving Function
- Enabling the DHCPv6 Server Function
- (Optional) Configuring the DHCPv6 Message Rate Limit and Alarm Function of DHCPv6 Messages Discarded
- (Optional) Configuring the Function of Recording a Log When an IPv6 Address or Prefix Is Allocated
- Verifying the DHCPv6 Server Configuration
- Configuring a DHCPv6 PD Server
- Configuring the DHCPv6 DUID
- Configuring an IPv6 PD Address Pool
- (Optional) Configuring Network Server Addresses for the IPv6 Address Pool
- (Optional) Configuring the Options of an IPv6 Address Pool
- (Optional) Configuring the DHCPv6 Data Saving Function
- Enabling the DHCPv6 PD Server Function
- (Optional) Configuring the DHCPv6 Message Rate Limit and Alarm Function of DHCPv6 Messages Discarded
- (Optional) Configuring the Function of Recording a Log When an IPv6 Address or Prefix Is Allocated
- Verifying the DHCPv6 PD Server Configuration
- Configuring a DHCPv6 Relay Agent
- Configuring the DHCPv6 DUID
- Configuring the DHCPv6 Relay Function
- (Optional) Inserting the Interface-ID or Remote-ID Option Information into DHCPv6 Messages
- (Optional) Configuring the Function of Inserting the Option79 Field into DHCPv6 Messages
- (Optional) Configuring the DHCPv6 Message Rate Limit and Alarm Function of DHCPv6 Messages Discarded
- Verifying the DHCPv6 Relay Agent Configuration
- Configuring a DHCPv6 Client
- Configuring a DHCPv6 PD Client
- Maintaining DHCPv6
- Configuration Examples for DHCPv6
- IPv6 DNS Configuration
- IPv6 over IPv4 Tunnel Configuration
- Overview of IPv6 over IPv4 Tunnels
- Understanding IPv6 over IPv4 Tunnels
- Licensing Requirements and Limitations for IPv6 over IPv4 Tunnels
- Configuring the IPv4/IPv6 Dual Stack
- (Optional) Enabling the Service Loopback Function on an Eth-Trunk
- Configuring an IPv6 over IPv4 Tunnel
- Configuring 6PE
- Monitoring the Running Status of the IPv6 over IPv4 Tunnel
- Configuration Examples for IPv6 over IPv4 Tunnels
- IPv4 over IPv6 Tunnel Configuration