Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Optimizing IP Performance
Pre-configuration Tasks
Before optimizing IP performance, configure IP addresses for interfaces. For details, see Configuring IP Addresses for Interfaces.
- Configuring Source IP Addresses Verification
- Discarding IP Packets with Invalid Destination IP Addresses and Recording Logs
- Configuring the Switch to Fragment Outgoing IP Packets
- Configuring a Load Balancing Mode for IP Packet Forwarding
- Configuring the Switch to Discard IP Packets with Options
- Configuring the Switch to Discard IP Packets Matching No Routing Entry
- Configuring the Switch to Discard IPv6 Packets with Specified Extension Headers
- Configuring an Interface to Forward Directed Broadcast Packets
- Enabling the Switch to Perform Layer 2 Forwarding for IP Traffic During a Ring Network Switchover
- Configuring ICMP Properties
- Configuring TCP Properties
- Verifying the IP Performance Optimization Configuration