Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the ARP Running Status
Context
To check the recent ARP packet information of a device, run the following commands in any view.
Procedure
- Run the display arp error packet command to check the last received 10 ARP error packets.
- Run the display arp ip-conflict track command to check records about IP address conflicts detected.
- Run the display arp packet statistics command to check ARP packet statistics.
- Run the display arp track command to check changes of outbound interfaces in ARP entries learned by a VLANIF interface.
- Run the display cpu-defend statistics packet-type arp-request all command to check statistics on ARP Request packets sent to the CPU.
- Run the display cpu-defend statistics packet-type arp-reply all command to check statistics on ARP Reply packets sent to the CPU.