Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Sending Update Packets and Maximum Number of Sent Packets
Context
To limit memory resources used to process RIP Update packets, set the interval for sending RIP Update packets and the maximum number of Update packets to be sent at a time.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- (Optional) On an Ethernet interface, run undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode.
- Run rip pkt-transmit { interval interval | number pkt-count } *
The interval for sending RIP Update packets and the maximum number of Update packets to be sent at a time are set.