Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
- About This Document
IP Routing- Static Route Configuration
- Overview of Static Routes
- Understanding Static Routes
- Application Scenarios for Static Routes
- Summary of Static Route Configuration Tasks
- Default Settings for Static Routes
- Configuring IPv4 Static Routes
- Creating IPv4 Static Routes
- (Optional) Setting the Default Preference Value for IPv4 Static Routes
- (Optional) Configuring Static Route Selection Based on Recursion Depth
- (Optional) Configuring Permanent Advertisement of IPv4 Static Routes
- (Optional) Preventing a Static Route from Being Selected If the Associated BFD Session Is in AdminDown State
- (Optional) Preventing Static Routes from Being Recursed to a Blackhole Route
- Verifying the IPv4 Static Route Configuration
- Configuring Static BFD for IPv4 Static Routes
- Configuring NQA for IPv4 Static Routes
- Configuring EFM for IPv4 Static Routes
- Configuring Association Between IPv4 Static Routes and a Route Monitoring Group
- Configuring IPv6 Static Routes
- Configuring Static BFD for IPv6 Static Routes
- Configuration Examples for Static Routes
- Example for Configuring IPv4 Static Routes
- Example for Configuring IPv6 Static Routes
- Example for Configuring Static BFD for IPv4 Static Routes
- Example for Configuring Static BFD for IPv6 Static Routes
- Example for Configuring NQA for IPv4 Static Routes
- Example for Configuring EFM for Static IPv4 Routes
- Example for Configuring Association Between IPv4 Static Routes and a Route Monitoring Group
- RIP Configuration
- Overview of RIP
- Understanding RIP
- Summary of RIP Configuration Tasks
- Licensing Requirements and Limitations for RIP
- Default Settings for RIP
- Configuring Basic RIP Functions
- Configuring RIP-2
- Preventing Routing Loops
- Controlling RIP Routing
- Controlling RIP Route Advertisement
- Controlling Receiving of RIP Routing Information
- Improving RIP Network Performance
- Configuring BFD for RIP
- Configuring the Network Management Function for RIP
- Maintaining RIP
- Configuration Examples for RIP
- Troubleshooting RIP
- RIPng Configuration
- Overview of RIPng
- Understanding RIPng
- Summary of RIPng Configuration Tasks
- Licensing Requirements and Limitations for RIPng
- Default Settings for RIPng
- Configuring Basic RIPng Functions
- Preventing Routing Loops
- Controlling RIPng Routing
- Controlling RIPng Route Advertisement
- Controlling the Receiving of RIPng Routes
- Improving RIPng Network Performance
- Clearing RIPng
- Example for Configuring RIPng to Filter the Received Routes
- OSPF Configuration
- Overview of OSPF
- Understanding OSPF
- Application Scenarios for OSPF
- OSPF Deployment Guide
- Summary of OSPF Configuration Tasks
- Licensing Requirements and Limitations for OSPF
- Default Settings for OSPF
- Configuring Basic OSPF Functions
- Configuring Session Parameters for OSPF Neighbor or Adjacency Relationships
- Configuring OSPF Attributes on Different Types of Networks
- Configuring OSPF Stub Areas
- Configuring an OSPF NSSA
- Configuring Local MT
- Adjusting OSPF Route Selection
- Controlling OSPF Routing Information
- Configuring OSPF to Import External Routes
- Configuring OSPF to Advertise Default Routes to an OSPF Area
- Configuring OSPF Route Summarization
- Configuring OSPF to Filter Received Routes
- Configuring OSPF to Filter the Routes to Be Advertised
- Configuring a Switch to Filter LSAs to Be Sent
- Configuring OSPF to Filter ABR Type3 LSAs
- (Optional) Enabling the Mesh-Group Function
- Setting the Maximum Number of External LSAs in the LSDB
- Verifying the OSPF Route Control Configuration
- Configuring BFD for OSPF
- Configuring OSPF IP FRR
- Configuring OSPF Fast Convergence
- Setting a Convergence Priority for OSPF Routes
- Setting an Interval for Sending Hello Packets
- Setting a Dead Time for a Neighbor Relationship
- Configuring Smart-discover
- Setting an Interval for Updating LSAs
- Setting an Interval for Receiving LSAs
- Setting an Interval for SPF Calculations
- Verifying the OSPF Fast Convergence Configuration
- Configuring OSPF GR
- Improving Stability of an OSPF Network
- Setting a Priority for OSPF Routes
- Configuring an LSA Transmission Delay on an Interface
- Configuring an Interval for Retransmitting LSAs Between Adjacent Switches
- Configuring a Stub Router
- Prohibiting an OSPF Interface from Sending and Receiving Protocol Packets
- Disabling the Function of Triggering Active/Standby Board Switchover upon Abnormal OSPF LSA Aging
- Verifying the OSPF Network Stability Optimization Configuration
- Improving the Security of an OSPF Network
- Configuring OSPF Neighbor Relationship Flapping Suppression
- Suppressing the Advertisement of Interface IP Addresses
- Configuring Network Management for OSPF
- Maintaining OSPF
- Configuration Examples for OSPF
- Example for Configuring Basic OSPF Functions
- Example for Configuring OSPF DR Election
- Example for Configuring OSPF Stub Areas
- Example for Configuring an OSPF NSSA
- Example for Configuring OSPF Virtual Links
- Example for Configuring OSPF Load Balancing
- Example for Configuring OSPF-BGP Synchronization
- Example for Configuring OSPF GR
- Example for Configuring BFD for OSPF
- Example for Configuring OSPF IP FRR
- Example for Configuring Local OSPF MT
- Troubleshooting OSPF
- OSPFv3 Configuration
- Overview of OSPFv3
- Understanding OSPFv3
- Summary of OSPFv3 Configuration Tasks
- Licensing Requirements and Limitations for OSPFv3
- Default Settings for OSPFv3
- Configuring Basic OSPFv3 Functions
- Establishing and Maintaining an OSPFv3 Neighbor Relationship
- Configuring an OSPFv3 Area
- Configuring an OSPFv3 NSSA
- Configuring OSPFv3 Route Attributes
- Controlling OSPFv3 Routing Information
- Optimizing an OSPFv3 Network
- Configuring an SPF Timer
- Setting an Interval at Which LSAs Are Received
- Configuring an Intelligent Timer for Generating LSAs
- Suppressing an Interface from Sending and Receiving OSPFv3 Packets
- Configuring a DR Priority for an Interface
- Configuring a Stub Router
- Ignoring MTU Check on DD Packets
- Verifying the OSPFv3 Network Optimization Configuration
- Configuring BFD for OSPFv3
- Configuring OSPFv3 IP FRR
- Configuring OSPFv3 GR
- Improving OSPFv3 Network Security
- Configuring OSPFv3 Neighbor Relationship Flapping Suppression
- Configuring OSPFv3 IPSec
- Configuring the Network Management Function of OSPFv3
- Resetting OSPFv3
- Configuration Examples for OSPFv3
- IPv4 IS-IS Configuration
- Overview of IS-IS
- Understanding IS-IS
- Basic Concepts of IS-IS
- IS-IS Fundamentals
- IS-IS Authentication
- IS-IS Route Leaking
- IS-IS Overload
- IS-IS Network Convergence
- IS-IS Neighbor Relationship Flapping Suppression
- IS-IS Administrative Tag
- IS-IS Wide Metric
- IS-IS LSP Fragment Extension
- IS-IS Host Name Mapping
- IS-IS Reliability
- IS-IS GR
- BFD for IS-IS
- IS-IS Auto FRR
- IS-IS TE
- IS-IS Local MT
- IS-IS Multi-Instance and Multi-Process
- Default Settings for IPv4 IS-IS
- Summary of IS-IS Configuration Tasks
- Licensing Requirements and Limitations for IPv4 IS-IS
- Configure Basic IS-IS Functions
- Improving IS-IS Network Security
- Controlling IS-IS Route Selection
- Controlling IS-IS Route Exchange
- Configuring IS-IS Route Summarization
- Controlling IS-IS Route Convergence
- Configuring LSP Fragment Extension
- Configuring a Mesh Group on an NBMA Network
- Configuring IS-IS Reliability
- Configuring IPv4 IS-IS Auto FRR
- Configuring the Overload Bit for an IS-IS Device
- Configuring IS-IS Neighbor Relationship Flapping Suppression
- Maintaining IS-IS
- Configuration Examples for IPv4 IS-IS
- Example for Configuring Basic IS-IS Functions
- Example for Configuring IS-IS Route Summarization
- Example for Configuring DIS Election
- Example for Configuring IS-IS Load Balancing
- Example for Configuring IS-IS to Interact with BGP
- Example for Configuring Local MT
- Example for Configuring IS-IS Fast Convergence
- Example for Configuring IS-IS Auto FRR (IP Protecting IP)
- Example for Configuring IS-IS Auto FRR (TE Protecting IP)
- Example for Configuring Static BFD for IS-IS
- Example for Configuring Dynamic BFD for IS-IS
- Example for Configuring IS-IS GR
- Troubleshooting IPv4 IS-IS
- IPv6 IS-IS Configuration
- Overview of IS-IS
- Understanding IPv6 IS-IS
- Summary of IPv6 IS-IS Configuration Tasks
- Licensing Requirements and Limitations for IPv6 IS-IS
- Default Settings for IPv6 IS-IS
- Configuring Basic IPv6 IS-IS Functions
- Improving IPv6 IS-IS Network Security
- Controlling IPv6 IS-IS Route Selection
- Configuring a Preference Value for IPv6 IS-IS
- Configuring a Cost for IS-IS Interfaces on an IPv6 Network
- Configuring Equal-Cost IPv6 IS-IS Routes
- Configuring IS-IS IPv6 Route Leaking
- Controlling Whether a Level-1 Device Generates an IPv6 Default Route
- Verifying the IPv6 IS-IS Route Selection Control Configuration
- Controlling IPv6 IS-IS Route Exchange
- Configuring IPv6 IS-IS Route Summarization
- Controlling IPv6 IS-IS Route Convergence
- Configuring LSP Fragment Extension
- Configuring a Mesh Group on an NBMA Network
- Configuring IPv6 IS-IS Reliability
- Configuring the Overload Bit for an IS-IS Device
- Maintaining IS-IS
- Configuration Examples for IPv6 IS-IS
- BGP Configuration
- Overview of BGP
- Understanding BGP
- Basic Concepts of BGP
- BGP Fundamentals
- Interaction Between BGP and IGPs
- BGP Security
- BGP Route Selection Rules and Load Balancing
- Route Reflector
- BGP Confederation
- Route Summarization
- Route Dampening
- BFD for BGP
- BGP Tracking
- BGP GR
- Dynamic Update Peer-Groups
- MP-BGP and Address Families
- BGP VPN Route Crossing
- Route Processing on the BGP router
- BGP Routing Table
- Route Attributes
- Summary of BGP Configuration Tasks
- Licensing Requirements and Limitations for BGP
- Default Settings for BGP
- Configuring Basic BGP Functions
- Configuring BGP Security
- Simplifying IBGP Network Connections
- Configuring BGP Route Selection and Load Balancing
- Configuring the BGP Priority
- Configuring the Next_Hop Attribute
- Configuring the PrefVal Attribute
- Configuring the Default Local_Pref Attribute
- Configuring the AS_Path Attribute
- Configuring the MED Attribute
- Configuring the BGP Community Attribute
- Configuring BGP Load Balancing
- Verifying the BGP Route Selection and Load Balancing Configuration
- Controlling the Receiving and Advertisement of BGP Routes
- Adjusting the BGP Network Convergence Speed
- Configuring a BGP ConnectRetry Timer
- Configuring BGP Keepalive and Hold Timers
- Configuring an Update Message Timer
- Disabling Rapid EBGP Connection Reset
- Configuring the BGP Next Hop Delayed Response
- Configuring BGP Route Dampening
- Configuring Slow Peer Detection
- Verifying the BGP Network Convergence Speed Adjustment Configuration
- Configuring BGP Reliability
- Configuring BGP Route Summarization
- Configuring BGP to Advertise Default Routes to Peers
- Configuring MP-BGP
- Maintaining BGP
- Configuration Examples for BGP
- Example for Configuring Basic BGP Functions
- Example for Configuring Basic BGP4+ Functions
- Example for Configuring Basic MBGP Functions
- Example for Configuring BGP to Interact with an IGP
- Example for Configuring AS_Path Filter
- Example for Configuring MED Attributes to Control BGP Route Selection
- Example for Configuring a BGP Route Reflector
- Example for Configuring a BGP4+ Route Reflector
- Example for Configuring a BGP Confederation
- Example for Configuring the BGP Community Attribute
- Example for Configuring BGP Load Balancing
- Example for Configuring a BGP Routing Policy
- Example for Configuring BFD for BGP
- Example for Configuring BFD for BGP4+
- Example for Configuring BGP GTSM
- Example for Configuring the BGP 6PE
- Routing Policy Configuration
- Overview of Routing Policies
- Understanding Routing Policies
- Summary of Routing Policy Configuration Tasks
- Licensing Requirements and Limitations for Routing Policies
- Configuring Filters
- Configuring a Routing Policy
- Configuring Filter-Policy
- Controlling the Valid Time of Routing Policies
- Maintaining Routing Policies
- Configuration Examples for Routing Policies
- IP Routing Table Management
- Licensing Requirements and Limitations for IP Routing Table Management
- Managing IP Routing Tables
- Displaying and Maintaining an IP Routing Table
- Displaying and Maintaining the Routing Management Module
- Displaying and Maintaining FIB Tables
- Configuring IP FRR on the Public Network
- Configuring IPv6 FRR on the Public Network
- Configuring the ECMP Load Balancing Mode
- Configuring the Advertisement of IPv4 ARP Vlink Direct Routes
- Example for Configuring IP FRR on the Public Network
- PBR Configuration
- Route Monitoring Group Configuration
- Overview of Route Monitoring Groups
- Application Scenarios for Route Monitoring Groups
- Understanding Route Monitoring Groups
- Licensing Requirements and Limitations for Route Monitoring Group
- Configuring Association Between IPv4 Static Routes and a Route Monitoring Group
- Example for Configuring Association Between IPv4 Static Routes and a Route Monitoring Group