Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BLE
Global Settings
Context
Bluetooth terminal location technology enables Bluetooth Low Energy (BLE) devices to locate Bluetooth terminals through the iBeacon protocol.
Procedure
- Set global parameters.
- Choose . The Global Settings page is displayed. Set the parameters in Table 5-144.
- Choose . The Global Settings page is displayed. Set the parameters in Table 5-144.
- Create a BLE device.
- Click Create. On the page that is displayed, set parameters for creating a BLE device. Table 5-145 describes the parameters for creating a BLE device.
Table 5-145 Parameters for creating a BLE device
Parameter
Description
Creation mode
Mode in which a BLE device is added.
MAC address
MAC address of a BLE device.
Start MAC
Start MAC address when a MAC address range is specified for adding a BLE device.
End MAC
End MAC address when a MAC address range is specified for adding a BLE device.
- Click Create. On the page that is displayed, set parameters for creating a BLE device. Table 5-145 describes the parameters for creating a BLE device.
- Delete a BLE device.
- Choose . The Global Settings page is displayed.
- Select a BLE device and click Delete.
- In the dialog box that is displayed, click OK.
BLE Monitoring Result
Procedure
- Choose . The BLE Monitoring Result page is displayed. You can view the BLE monitoring result based on Filter condition, as shown in Figure 5-241.
