Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AAA Service App
This node is only available in the NAC unified and non-NETCONF modes.
Wired Interface Authentication
Procedure
- Physical Interface Authentication
- Choose and click the Wired Interface Authentication tab, as shown in Figure 5-179.
- VLAN Authentication
- Choose and click the Wired Interface Authentication tab, as shown in Figure 5-179.
- Click
to select VLAN ID.
- Select an authentication profile from Authentication profile to bind to a vlan.
- Click Apply.
to select
VLAN ID.Wireless Interface Authentication
Procedure
- Choose . Click the Wireless Interface Authentication tab, as shown in Figure 5-180.
- Select an AP group.
- Select a VAP.
- Select an authentication profile.
- Click Apply.
