No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, WLAN, diagnosis service, and EasyDeploy.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Batch Configuration
Batch Configuration
Procedure
Configure clients in a batch.
Click Network in the function area to display the Network page.
Click Batch Configuration in the navigation tree to display the Batch
Configuration page.
Select the device to be configured and click Batch Configuration, as shown in Figure 8-9. Import the script file.
Figure 8-9 Batch Configuration
Check the configuration.
Click Network in the function area to display the Network page.
Click Batch Configuration in the navigation tree to display the Batch
Configuration page.
Click Query Configuration Result. The configuration is displayed in the list.