Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RF-Ping
Context
The RF-Ping tool checks the quality of the link between the AP and STA.
After the RF-Ping test is performed, the test result is displayed.
This node is only available in the NAC unified mode.
The web system is applicable to wireless service deployment on small- and middle-sized networks. For large-sized networks, use other network management systems, such as eSight.
Procedure
- Choose . The RF-Ping page is displayed.
- Set RF-Ping parameters. For description of the parameters, see Table 6-5Table 6-5 RF-Ping parameters
Parameter
Description
STA MAC address
MAC address of a STA.
WMM priority of packets
Specifies the priority of probe data packets sent by the AP, which can be AC_BE, AC_BK, AC_VI, or AC_VO.
RF ping interval (ms)
Specifies the interval for sending probe data packets.
Number of RF pings
Specifies the number of probe data packets sent by the AP.
- Click .
