Radio

Procedure

• View the radio list.
  1. Choose Monitoring > Wireless Service > Radio. The Radio List page is displayed.

  2. Click ALL, 5G, and 2.4G. The radio information of the corresponding channel is displayed.
  3. Click All to display all items. Click Custom to customize items to be displayed.
     Table 4-7 Statistics in the radio list

     Parameter	Description
     AP ID	ID of the AP.
     AP Name	Name of the AP.
     Radio ID	Radio ID of the AP.
     Frequency Band	Frequency band on which a radio works.
     STA HT Mode	Radio type.
     Status	Radio status.
     Working Mode	Radio working mode.
     Channel	Working channel of a radio.
     Frequency Bandwidth	Channel bandwidth of a radio.
     EIRP/Max EIRP	Radio power configured/Maximum power in compliance with local laws and regulations.
     Access STA	Number of STAs associated with a radio.
     Noise Strength	Radio noise level.
     Channel Usage	Channel usage of a radio.
     Rate	Radio rate.
     Total Frame Quantity	Total number of frames received and sent by a radio.
     Downlink Retransmission Ratio	Retransmission ratio on a radio.
     Downlink Packet Loss Ratio	Packet loss ratio on a radio.

  4. Search for a radio.

     In Radio Performance Distribution, select specific radios based on the noise level, channel usage, interference ratio, downlink retransmission rate, and downlink packet loss rate (select an area in the bar graph).

• Implement spectrum analysis.

  Select a radio from Radio List and click Spectrum Analysis. The spectrum charts of the radio are displayed. For details, see Spectrum Analysis.

• Intelligently diagnose radio faults.

  Select a radio in Radio List and click Intelligent Diagnosis to diagnose Mesh link faults, AP failures, and AP upgrade failures. The web platform will provide handling suggestions. For details, see Intelligent Diagnosis.

• Capture wireless packets.

  Select a radio in Radio List and click Wireless Packet Obtaining to capture wireless packets so that you can identify faults. For details, see Wireless Packet Capturing.

• View field strength information.

  Select a radio in Radio List and click Mesh Neighbor Field Strength to view field strength information.
  
  

  Table 4-8 Field strength information

  Parameter	Description
  Local AP ID	ID of the local AP.
  Local AP Name	Name of the local AP.
  Local AP MAC	MAC address of the local AP.
  Radio ID	ID of a radio of which field strength information is collected.
  Local AP Position No.	This parameter takes effect only when the location-based handover algorithm is enabled.
  Neighboring AP ID	ID of the peer AP.
  Neighboring AP Name	Name of the peer AP.
  Neighboring AP MAC	MAC address of the peer AP.
  Neighboring AP Position No.	This parameter takes effect only when the location-based handover algorithm is enabled.
  Neighboring AP RSSI	RSSI of the peer AP.
  Refresh Time	Interval for updating field strength information.

• View radio calibration records.

  Click Radio Calibration Record. Radio calibration records are displayed.
  
  

  Table 4-9 Description of radio calibration records

  Parameter	Description
  Time	Time when calibration is triggered.
  AP ID	ID of the AP.
  AP Name	Name of the AP.
  Radio ID	ID of the radio.
  Channel Before/After Calibration	Radio channel before/after radio calibration.
  Bandwidth Before/After Calibration	Radio bandwidth before/after radio calibration.
  Eirp Before/After Calibration	Transmit power of the radio before/after radio calibration.
  RSSI Before/After Calibration	RSSI of an AP before/after radio calibration.
  Calibration Cause	Cause of radio calibration.

• Export the radio list.

  Click Export Info. The radio list is exported in a .csv file.