Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Certificate Mgmt (NETCONF Mode)
Procedure
- Choose to open the Certificate Mgmt page, as shown in Figure 7-51.
Table 7-27 describes parameters on the Certificate Mgmt page.
Table 7-27 Certificate MgmtParameter
Description
Upload and Load CA Certificate
Load a CA certificate file
Specifies a CA certificate to be imported. For example, when the switch functions as an SSL agent, it can have an SSL agent CA certificate imported and use the private key of this certificate to sign the SSL client certificate again.
Upload and Load Local Certificate
Set an encryption key
Specifies an encryption password for an RSA key pair file.
Load a local certificate file
Specifies a local certificate to be imported.
Current Certificate Information
Displays Certificate Status, Certificate Version, and Certificate Serial Number of the CA certificate and local certificate.
- Click
in Load a CA certificate file and select a CA certificate file to be loaded.
- Click Load to upload the CA certificate file.
- Configure an encryption password, and click
in Load a local certificate file to select a local certificate file to be loaded, and click Load.
- Check the CA certificate and local certificate in Current Certificate Information.
in