WLAN Location Profile
|
Name of the location profile, which cannot be modified.
|
Source IP address of outgoing packets
|
Source IP address in location packets reported to the AC. This parameter takes effect only in AeroScout and Ekahau positioning.
|
AeroScout Location
|
Tag location
|
Whether to enable WLAN location of AeroScout tags.
|
STA location
|
Whether to enable WLAN location of AeroScout MUs.
|
Packet aggregation interval (100 ms)
|
Interval of AeroScout tag location packet aggregation and MU packet aggregation.
|
Data report mode
|
Mode in which AeroScout location packets are reported.
- Through AC: An AP reports AeroScout location packets to an AC, and the AC forwards them to the AeroScout location server.
- AP: An AP directly reports AeroScout location packets to the AeroScout location server without sending them to the AC.
NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.
|
Server port number
|
Port number of the AeroScout location server.
|
AC port number
|
AC port number used to communicate with the AeroScout location server.
|
Ekahau Location
|
Tag location
|
Whether to enable WLAN location of Ekahau tags.
|
Data report mode
|
Mode in which Ekahau location packets are reported.
- Through AC: An AP reports Ekahau location packets to an AC, and the AC forwards them to the Ekahau location server.
- AP: An AP directly reports Ekahau location packets to the Ekahau location server without sending them to the AC.
NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.
|
Server IP/port number
|
IP address and port number of the Ekahau location server.
|
AC port number
|
AC port number used to communicate with the Ekahau location server.
|
Private Location
|
STA location
|
Whether to enable STA location.
|
Data report interval (ms)
|
Interval for reporting STA location packets.
|
Protocol version
|
Version of the STA location protocol.
- V3: The location protocol is Version 3.
- V5: The location protocol is Version 5.
|
Data report mode
|
Mode in which STA location packets are reported.
- Through AC: An AP reports STA location packets to an AC, and the AC forwards them to the STA location server.
- AP: An AP directly reports STA location packets to the STA location server without sending them to the AC.
NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.
|
Server IP/port number
|
IP address and port number of the STA location server.
|
AC port number
|
AC port number used to communicate with the STA location server.
|
Wireless Device Location Data
|
Wireless location collection
|
Whether to enable the device to collect wireless device location data.
|
RSSI threshold for collecting location data (dBm)
|
The RSSI threshold for wireless device location data.
This parameter can be configured only when Wireless location collection is set to ON.
|
Paibo Location
NOTE: This parameter is available only when the Paibo plug-in is installed.
You can search for Plug-in Usage Guide at the Huawei technical support website (Enterprise Network or Carrier), and choose the desired plug-in usage guide based on the switch model and software version. If you do not have permission to access the website, contact technical support personnel.
|
Paibo Location
|
Whether to enable the Paibo terminal location function on APs.
|
Data report interval
|
The interval at which APs report channel scan information.
|
IP address/Port number of the report server
|
The destination IP address and port number of the Paibo location server to which APs report location data.
|
AC port number
|
The destination port number of the AC to which APs report location data
|
Key
|
Specifies the key used to encrypt location data.
|
Initial vector
|
Specifies the IV used to encrypt location data.
|
