Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Panel
Context
The panel diagram displays information about running cards (including MPUs and service cards) and power modules on a switch, and also shows empty slots on the switch. When you move the mouse on a service card, basic information about the service card is displayed. You can click a service card to display the interface status on the service card.
Procedure
- Choose . The panel diagram is displayed, as shown in Figure 4-1.
A card is in either of the following states:
- Normal Running: The card is running properly, the standby MPU is performing HA backup, the LPU is restoring configurations, or the LPU is isolated.
- Abnormal Running: The card is not registered or is running abnormally.
- Click a service card on the panel to display the interface status section, as shown in Figure 4-2.
