Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
- About This Document
- Configuration Notes
Web System Login- Client Configuration
- Monitor
- Configuration
- Diagnosis
- Maintenance
- System Maintenance
- License (SRUH/SRUHA1/SRUHX1/SRUE Main Control Card)
- License (Non-SRUH/SRUHA1/SRUHX1/SRUE Main Control Card)
- Reboot (Standalone)
- Reboot (SVF)
- Upgrade (Standalone)
- Upgrade (SVF)
- Web File Management
- Patch (Standalone)
- Patch (SVF)
- Plug-in Management
- Log
- Alarm & Event
- Administrator
- System
- SNMP
- Electronic Label
- SMI (NETCONF Mode)
- AS Interface (SVF)
- Certificate Mgmt (NETCONF Mode)
- Controller Mgmt (NETCONF Mode)
- Device Working Mode
- AP Maintenance
- Network
- Profile
- Wireless Service
- VAP Profile
- SSID Profile
- Security Profile
- Traffic Profile
- 802.1X Profile
- Portal Profile
- MAC Authentication Profile
- Authentication-free Rule Profile
- URL Profile
- Authentication Scheme
- Authorization Scheme
- Accounting Scheme
- Service Scheme
- Authentication Profile
- STA Blacklist Profile
- STA Whitelist Profile
- SoftGRE Profile
- Cellular Network Profile
- Roaming Consortium Profile
- NAI Realm Profile
- Network Connection Capability Profile
- Operator Domain Profile
- Carrier Name Profile
- Venue Name Profile
- Operating Class Profile
- Hotspot2.0 Profile
- Radio Management
- AP
- Mesh
- WDS
- WIDS
- WLAN Location
- Bluetooth Service
- IoT
- WMI Function
- Configuration Examples
- Example for Configuring a Small-Sized Campus Network
- Example for Backing Up the Configuration File
- Example for Configuring EasyDeploy
- Example for Configuring SNMP
- Example for Configuring SVF
- Example for Configuring IPv4 Static Routes
- Example for Configuring IPv6 Static Routes
- Example for Configuring a Device as a DHCP Server (Based on an Interface Address Pool)
- Example for Configuring IPSG Based on the DHCP Snooping Dynamic Binding Table to Prevent Hosts from Changing Their Own IP Addresses
- Example for Connecting IP Phones to Switches Through LLDP
- Example for Configuring Unified Access for Wired and Wireless Users
- Example for Using Advanced ACLs to Control Access to the Specified Server in the Specified Time Range
- Example for Using Advanced ACLs to Restrict Mutual Access Between Network Segments