Topology (SVF)

Enterprise

Worldwide

Topology (SVF)

The topology is displayed only in SVF mode.

Choose Monitoring > Topology. Click the SVF icon. The level-1 AS topology is displayed, as shown in Figure 4-16.
Figure 4-16 Level-1 AS Topology
Click the level-1 AS icon to display the level-2 AS topology, as shown in Figure 4-17.
Figure 4-17 Level-2 AS Topology
Choose Monitoring > Topology. Click the parent name. The parent panel is displayed, as shown in Figure 4-18.
Figure 4-18 Parent panel
Click the AS port. The level-1 AS topology is displayed, as shown in Figure 4-19.
Figure 4-19 Level-1 AS panel

Click an interface on the level-1 AS panel. The level-2 AS panel, online AP information, or online user information on the interface is displayed.

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, WLAN, diagnosis service, and EasyDeploy.