Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Device Working Mode
Context
Only the following switch models support NETCONF:
S7703 (using MCUD), S7706 (using SRUHA1, SRUHX1, SRUH, and SRUE), S7712 (using SRUHA1, SRUHX1, SRUH, and SRUE), S7703 PoE (using MCUD), S7706 PoE (using SRUHA1, SRUHX1, SRUH, and SRUE)
Switches can switch between Traditional management mode and NETCONF mode. In NETCONF mode, the web system supports the functions listed in Table 7-28.
Table 7-28 Description of web system navigation tree (NETCONF mode)
Menu |
Submenu |
|---|---|
Monitoring |
Including the device panel, device information, device status, top 5 interface bandwidth utilization, logs, alarms, power module information, user information, and wireless services. |
Configuration |
Security Services
Wireless Services
|
Diagnosis |
Diagnostic tools:
|
Maintenance |
System Maintenance
AP Maintenance
|
Procedure
- Choose to open the Device Working Mode page, as shown in Figure 7-54.
- Set the working mode of a switch.
- Traditional management mode: You can configure and manage the switch using SNMP or commands.
- NETCONF mode: You can configure and manage the switch using the Controller.
- Click Apply to complete the configuration.
