SMI (NETCONF Mode)
Context
Only the S7703 (The main control unit is MCUD.), S7706 (The main control unit is SRUE, SRUHA1, SRUHX1, or SRUH.), S7706 PoE (The main control unit is SRUE, SRUHA1, SRUHX1, or SRUH.), and S7712 (The main control unit is SRUE, SRUHA1, SRUHX1, or SRUH.) support SMI.
Procedure
- Choose . The SMI page is displayed, as shown in Figure 7-49.
Table 7-26 describes the parameters for configuring SMI.
Table 7-26 SMI configurationParameter
Description
Server address
IPv4 address of connected iMaster NCE-CampusInsight.
Port
Port number of connected iMaster NCE-CampusInsight.
Report interval (s)
Interval at which the switch reports KPI information to iMaster NCE-CampusInsight.
Maximum size of data reported at one time (KB)
Maximum size of packets sent by the switch to report KPI information to iMaster NCE-CampusInsight.
Heartbeat time (min)
Interval at which the switch and iMaster NCE-CampusInsight send heartbeat packets to each other.
Server reconnection interval (min)
Interval at which the switch reconnects to iMaster NCE-CampusInsight after port disconnection for the first time.
Number of reconnection attempts
Maximum number of attempts the switch reconnects to iMaster NCE-CampusInsight after port disconnection for the first time.
Reported monitoring data
Reported monitoring data sent by the switch to iMaster NCE-CampusInsight.
Interval for reporting Device-data monitoring data (min)
Interval for reporting device data to iMaster NCE-CampusInsight.
This parameter can be configured only when Reported monitoring data is set to Device-data.
Interval for reporting Fiber-module monitoring data (min)
Interval for reporting optical module information to iMaster NCE-CampusInsight.
This parameter can be configured only when Reported monitoring data is set to Fiber-module.
Interval for reporting Device-status monitoring data (min)
Interval for reporting device status information to iMaster NCE-CampusInsight.
This parameter can be configured only when Reported monitoring data is set to Device-status.
Interval for reporting poe monitoring data (min)
Interval for reporting PoE data to iMaster NCE-CampusInsight.
This parameter can be configured only when Reported monitoring data is set to PoE.
Interval for reporting User-data monitoring data (min)
Interval for reporting wired user data to iMaster NCE-CampusInsight.
This parameter can be configured only when Reported monitoring data is set to User-data.
- Set the parameters.
- Click Apply.
