Static Routes

Enterprise

Worldwide

Static Routes

IPv4 Static Routes

Check IPv4 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-73.
  Figure 5-73 IPv4 Static Routes
2. Set the search criteria.
3. Click to display all matching records.
Add IPv4 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-73.
2. Click Add to display IPv4 static route settings, as shown in Figure 5-74.
  Figure 5-74 Adding IPv4 static routes
3. Set values for Destination IP Address, Destination IP Address Mask, Next Hop Address, and Priority. Click to select Outbound Interface.
4. Click to complete the configuration.
Delete IPv4 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-73.
2. Select the IPv4 static route to be deleted and click Delete.
3. In the dialog box that is displayed, click OK.

Check IPv6 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-75.
  Figure 5-75 IPv6 Static Routes
2. Set the search criteria.
3. Click to display all matching records.
Add IPv6 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-75.
2. Click Add to display IPv6 static route settings, as shown in Figure 5-76.
  Figure 5-76 Adding IPv6 static routes
3. Set values for Destination IPv6 Address, Destination IPv6 Prefix Length, Next Hop Address, and Priority. Click to select Outbound Interface.
4. Click to complete the configuration.
Delete IPv6 static routes.
1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-75.
2. Select the IPv6 static route to be deleted and click Delete.
3. In the dialog box that is displayed, click OK.