No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PAF/6/LCS_NOT_SAME:The license file on this board is not the same as that on the system main control board.
Description
The License file on this board is different from that on the main control board of the system.
Parameters
Parameter Name
Parameter Meaning
None
None.
Possible Causes
The License file on this board is different from that on the main control board of the system.
Procedure
This log message is informational only, and no action is required.
PAF/6/PAF_NOT_SAME
Message
PAF/6/PAF_NOT_SAME:The PAF file on this board is not the same as that on the system main control board.
Description
The PAF file on this board is different from that on the main control board of the system.
Parameters
Parameter Name
Parameter Meaning
None
None.
Possible Causes
The PAF file on this board is different from that on the main control board of the system.
Procedure
This log message is informational only, and no action is required.
PAF/4/READLCSFAIL
Message
PAF/4/READLCSFAIL:Failed to read License file when initializing LCS. (ErrorCode=[LONG])
Description
Failed to read the License file in initialization.
Parameters
Parameter Name
Parameter Meaning
ErrorCode
Indicates the error code:
-2: indicates that the handle is invalid.
-3: indicates the pointer is invalid.
-4: indicates the opening type is incorrect.
-5: indicates that the parameter is incorrect.
Possible Causes
Failed to read the License file when initializing the License file.
Procedure
Run the dir license.txt command to check whether the license.txt exists. If so, check whether the length of the file is longer than zero. If so, run the copy license.txtslave#flash:/ command to copy the license to the slave
board. Then, run the slave restart command to restart the slave board.
PAF/4/READPAFFAIL
Message
PAF/4/READPAFFAIL:Failed to read PAF file when initializing PAF. (ErrorCode=[LONG])
Description
Failed to read the PAF file when initializing PAF file.
Parameters
Parameter Name
Parameter Meaning
ErrorCode
Indicates the error code:
-2: indicates that the handle is invalid.
-3: indicates the pointer is invalid.
-4: indicates the incorrect opening type.
-5: indicates that the parameter is incorrect.
Possible Causes
Failed to read the PAF file when initializing PAF file.
Procedure
Run the dir license.txt command to check whether the license.txt exists. If so, check whether the length of the file is longer than zero. If so, run the copy license.txt slave#flash:/ command to copy the license to the slave
board. Then, run the slave restart command to restart the slave board.
PAF/5/WRITE_LCS_FAIL
Message
PAF/5/WRITE_LCS_FAIL:Failed to write License file when synchronizing the License file from the target main control board.
Description
Failed to write the License file when synchronizing the License file from the target main control board.
Parameters
Parameter Name
Parameter Meaning
None
None.
Possible Causes
Failed to write the License file when synchronizing the License file from the target main control board.
Procedure
This log message is informational only, and no action is required.
PAF/5/WRITE_PAF_FAIL
Message
PAF/5/WRITE_PAF_FAIL:Failed to write PAF file when synchronizing the PAF file from the target main control board.
Description
Failed to write the PAF file when synchronizing the PAF file from the target main control board.
Parameters
Parameter Name
Parameter Meaning
None
None.
Possible Causes
Failed to write the PAF file when synchronizing the PAF file from the target main control board.
Procedure
This log message is informational only, and no action is required.
