Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TPLMNG
TPLMNG/3/CMDEXECFAIL
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
Command |
Indicates the command that failed to be executed. |
Reason |
Indicates the failure cause. |
Possible Causes
When the commit as all command was executed for batch operation, topology collection was not completed or other operations were performed on some ASs. As result, the batch operation failed on these ASs.
Procedure
- Run the display uni-mng commit-result command to find the ASs on which the batch operation failed.
- Run the commit as command to deliver service configurations to these ASs again.
- If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.